Transparent parts for printer

×

Transparent mechanical parts of printers such as laser beam printers (LBP) and inkjet printers (IJP). 
Visibility and laser weldability are required.

https://www.asahi-kasei-plastics.com/wp-content/uploads/2023/11/printer-transparent-parts.jpg * For illustrative purposes

Related articles

Products

CN51V

Features

  • Transmits 940nm infrared light
  • Laser weldable when used with other grades of XYRON™ black colorants

Covers for mechanical parts of printers such as laser beam printers (LBP) and inkjet printers (IJP).
Silence is required to reduce noise generated from mechanical parts.

https://www.asahi-kasei-plastics.com/wp-content/uploads/2023/11/printer-covers.jpg

Products

VT31V, VT31Z

Features

  • High loss factor, high attenuation
  • Realization of noise reduction design by vibration damping
  • Flame resistance

Gear for printer

×

A part that transmits torque and rotational accuracy by rotating a gear with meshing teeth around a shaft.
Durability and sliding properties are required.

https://www.asahi-kasei-plastics.com/wp-content/uploads/2021/03/printergear.jpg

Related articles

Products

NS556, LX750, LZ750

Features

  • High stiffness
  • High durability
  • High sliding property
  • Low warpage
  • High precision

Housing/chassis for printer

×

Chassis and mechanical parts for printers such as laser beam printers (LBP) and inkjet printers (IJP).
High dimensional accuracy, flame retardancy, and heat resistance are required.

https://www.asahi-kasei-plastics.com/wp-content/uploads/2021/07/xyron_thum.jpg

Related articles

Products

X7744,X444V,X523V,X364V (PS alloy)

DG040,DG235,DG141 (PPS alloy)

Features

PS alloys

  • Low warpage and high dimensional accuracy
  • Low specific gravity
  • High stiffness
  • Non-halogenated flame retardancy
  • A wide range of heat resistance temperatures can be designed

PPS alloys

  • Chemical resistance
  • Low warpage and high dimensional accuracy
  • High heat resistance
  • Good fluid properties
  • High stiffness

Bearings, rollers for printer

×

Mechanical parts used in printers, such as shafts, bearings, arms, rollers, and cams.
Long-term durability, sliding properties, wear resistance, etc. are required.

https://www.asahi-kasei-plastics.com/wp-content/uploads/2021/03/printer2.jpg

Related articles

Products

Features

  • High durability
  • Fatigue resistance
  • Sliding properties
  • Thin-wall moldability

Conductive bearing

×

Electrical contact parts and grounding parts. Substitution of metal by conductive resin.
The shape flexibility unique to resin eliminates secondary processing, leading to improved productivity and cost reductions.

https://www.asahi-kasei-plastics.com/wp-content/uploads/2021/03/bearing-e1658912658655.jpg

Related articles

Products

TFC77, TFC84, EF850

Features

  • Electrical conductivity (volume resistivity 100~101Ω・cm)
  • Sliding property  (TFC77)
  • Toughness (TFC84)
  • Good moldability  (EF850)