Molding conditions

Category		Non-reinforced	High molecular	Friction modified	Non reinforced, Flame retardant ​
Grade		1300S 1402S	1500 1502 1502S 1700S 1702 9400S	1442 1542	FR200	FR370 FR650
Predrying Conditions (Dehumidifying drying  or Vacuum drying)	Temp.(°C)	80-90	80-90	80-90	80-90	80-90
	Time (hr.)	2-3	2-3	2-3	2-3	2-3
Molding Conditions	Resin Temp. (°C)	270-290	270-290	270-290	250-260	265-275
	Mold Temp. (°C)	75-85	75-85	75-85	75-85	75-85

 

Category		GF reinforced	GF reinforced, Excellent surface and enhanced strength	Special composite, Excellent surface and enhanced strength	GF reinforced, High stiffiness after absorption of water	Impact modified
Grade		13G15 1300G 13G43 13G50 14G15 1402G 14G25 14G30 14G33 14G35 14G43 14G50 15G20	90G33 90G50 90G55 90G60	91G55 91G60	SG104 SG105 SG106	TR161 TR382
Predrying Conditions (Dehumidifying drying  or Vacuum drying)	Temp.(°C)	80-90	80-90	80-90	80-90	80-90
	Time (hr.)	2-3	2-3	2-3	2-3	2-3
Molding Conditions	Resin Temp. (°C)	275-295	275-295	275-295	280-300	270-290
	Mold Temp. (°C)	75-85	85-95	85-95	100-120	75-85

 

Category		GF reinforced, Excellent surface and enhanced stiffness	GF reinforced, Hydrosis resistance	Special composites, general	GF reinforced, flame retardant	GF reinforced, high stiffness, flame retardant	GF reinforced, excellent surface, halogen-free flame retardant
Grade		54G33 54G43 93G33	53G33 BG230	CR103 CR301 CR302 MR001 1330G	FG170 FG171 FG172 FG173 FH772	SH10E	SN10B SN103
Predrying Conditions (Dehumidifying drying  or Vacuum drying)	Temp.(°C)	80-90	80-90	80-90	80-90	80-90	80-90
	Time (hr.)	2-3	2-3	2-3	2-3	2-3	2-3
Molding Conditions	Resin Temp. (°C)	270-290	270-290	275-295	270-280	275-290	280-290
	Mold Temp. (°C)	75-85	75-85	75-85	75-85	110-130	85-95

 

Note

Pre-drying conditions indicate dehumidified or vacuum-dried conditions. Please note that prolonged drying at high temperatures may result in discolouration. Unopened products do not need to be dried if they are to be used immediately after opening. Three hours after opening should be used as a guide. In case of high moisture absorption, vacuum drying (90°C, 24 hours) is recommended. The mold temperature for LEONA™ 90G series should be higher than that of standard nylon 66 (recommended temperature 90°C).